Ultra Grip DTF Powder - Drum

Ultra Grip DTF Powder

Maximum Adhesion for Unmatched Durability

Take your DTF prints to the next level with Ultra Grip DTF Heat Transfer Powder, engineered for superior adhesion, stretchability, and long-lasting durability. Designed to bond seamlessly with DTF inks and films, this premium-grade powder ensures crisp, vibrant transfers that resist cracking, peeling, and fading—even after multiple washes.

• Ultra-Strong Adhesion – Provides exceptional grip on cotton, polyester, blends, and more.
• Soft & Flexible Feel – Keeps prints smooth and stretchable without stiffness.
• Wash-Resistant Durability – Maintains bold colors and sharp details wash after wash.
• Low-Melt Formula for Efficient Curing – Ensures fast, even melting for consistent results.
• Anti-Clumping & Easy Application – Flows smoothly for even coating, minimizing waste and mess.

Perfect for both hot and cold peel DTF transfers, Ultra Grip DTF Powder gives your prints the ultimate hold and professional-quality finish—making every transfer flawless and long-lasting. 

Grip stronger. Last longer. Print with confidence.

Instructions:

• Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
• Apply hot melt powder evenly and remove the excess powder.
• Hover with a heat press to bake the hot melt powder. 
• 320°F (160°C) for 3-4 Min
• 392°F (200°C) for 2 Min
• Please make sure that the powder is fully melted. 
• Transfer the image by head press with medium pressure. 
• 248°F (120°C) for 5 Sec
• 284°F (140°C) for 5 Sec  (*Best results at 284°F for 10 sec) 
• 320°F (160°C) for 5 Sec
• Remove the film gently. (According to hot peel, warm peel or cold peel) 
• Additional curing >>Heat press again to enhance softer hand feel. 
• 248°F (120°C) for 5 Sec
• 284°F (140°C) for 5 Sec  (*Best results at 284°F for 5 sec) 
• 320°F (160°C) for 5 Sec

Warning

• Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive into the intake fan by electroics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.
• Please wear personal protective equipment (eyeglasses, mask, gloves) when working with DTF products. The fumes from curing the powder can be hazardous.